Step 4: aGate
● Use a #3X4” Phillips head cross screwdriver or an electric screwdriver with a Phillips head cross screw bit. Turn the 6
combination screws fastening the internal panel counterclockwise to remove the screws. Please keep the internal panel of aGate out
of the way.
WARNING: Misconduct may lead to
thread galling, which will damage aGate
as the screws can not be loosened.
● Use a #2X4” Phillips head cross screwdriver. Turn the (6) recessed screws fastening the hinge on the external panel of aGate, to
remove the screws. Please don’t lose the recessed screws and set aside the external panel.
WARNING: Carefully loosen the screws
to avoid stripping the threads or the heads.
33
To Next Page
Loading...
