PBA100 Rev0407
5
Specifications
The PumpBoss is available in various models. Each model is programmed to
interface with specific engines. All models provide the same functions, controls, and
digital readouts for the management of pump discharge pressure.
Display Module
Supply Power: 12/24 VDC
Supply Current: 0.5 Amps
Dimensions: 4 5/8” Wide by 6 3/4” High
LED Bar Graphs
Oil Pressure: 10 - 100 PSI (10 PSI Increments)
Temperature (Engine Coolant): 130 - 240 °F (10° Increments)
Battery Voltage: 11.5 - 16 Volts (0.5 Volt Increments)
Engine Sensors
Engine Oil Pressure: 0 - 100 PSI, 1/8” NPTF
Engine Coolant Temperature: 100 - 250 °F, 1/2” - 14 NPT
Transmission Temperature: 140 - 320 °F, 1/8” NPTF
Pressure Sensor
Model Number: XE-PRO31PT2 XE-FP4000PT1
Pressure Range: 0 - 300 PSI 0 - 600 PSI
Proof Pressure: 800 PSI 1200 PSI
Excitation Voltage: 5 VDC 5 VDC
Output Voltage: 0.5 - 4.75 VDC (See Table 1)
Table 1. Pressure Sensor Output Voltage
0psi 100psi 150psi 200psi 250psi 300psi 600psi
XE-PRO31PT2 0.5vdc 1.917vdc 2.625vdc 3.33vdc 4.04vdc 4.75vdc N/A
XE-FP4000PT1 0.5vdc 1.12vdc 1.56vdc 1.92vdc 2.27vdc 2.625vdc 4.75vdc
To Next Page
Loading...
