PBA100 Rev0407
9
Figure 1. Controls and Indicators
Control Knob
When rotated changes the pressure or RPM setting. The setting will increase or
decrease proportionally to the speed and direction the control knob is rotated.
RPM LED
The LED is on to indicate operation in the RPM mode.
PSI LED
The LED is on to indicate operation in the PSI mode.
MODE Button
Press to change modes.
Day/Night Sensor
Adjusts the brightness of the LED displays for best day or night viewing.
MENU Button
Used when accessing stored data and program features.
RPM
Display
Message
Display
OIL
PRESSURE
LED Display
TEMPERATURE
LED Display
SILENCE
Button
MENU
Button
BATTERY
VOLTAGE
LED Display
Control Knob
IDLE
Button
THROTTLE
READY
LED
RPM
LED
PSI
LED
MODE
Button
PRESET
Button
STOP
ENGINE
LED
CHECK
ENGINE
LED
Day/Night
Sensor
To Next Page
Loading...
