Freestyle Libre - Logbook

Perform a Reader Test
If you think the Reader is not working properly, you
can check the Reader by performing a Reader Test.
Touch the Settings symbol
from the Home
Screen, select System Status and then select
Reader Test.
Note: The Reader Test will perform internal
diagnostics and will allow you to check that the
display, sounds, and touchscreen are working
properly.
Customer Service
Customer Service is available to answer any questions you may have
about your FreeStyle Libre Flash Glucose Monitoring System. Please go to
the back cover of this manual for your Customer Service phone number.
System Info
Reader Test
Event Log
System Status
OK
System Specifications
See test strip and control solution instructions for use for additional
specications.
Sensor Specifications
Sensor glucose assay
method
Amperometric electrochemical sensor
Sensor glucose reading
range
40 to 500 mg/dL
Sensor size 5 mm height and 35 mm diameter
Sensor weight 5 grams
Sensor power source One silver oxide battery
99 100
ART38553-101_rev-A_manual.indd 99-100 2/1/18 2:13 PM