Press ‘GO’
Docking options
Press GO
Scroll until ‘Entry Points’
is displayed
Time: Mo 11:55
Press GO
Entry Points
Press GO
Press ‘GO’
Set Entry Points
Pres GO to learn
Press ‘GO’
Manual Depart
Press GO
Press the down
Scroll arrow
Entry 1: Docking
Pres GO for next
Press ‘GO’ - Mower will
start to follow the perimeter
Entry 2 of 4
Pres GO to set
Follow the mower and
Press ‘GO’ at the point
you want to set
Entry 3 of 4
Pres GO to set
Press ‘GO’ for other points
or leave the mower to
complete the edge
11:28 Mo10:30E
Press GO
One of the following displays is appeared
when the mower is in the Docking Station
Press ‘GO’
Docking options
Press GO
Press ‘GO’
Docking options
Press GO
Scroll until ‘Entry Points’
is displayed
Weekly program
Press GO
Entry Points
Press GO
Press ‘GO’
Set Entry Points
Pres GO to learn
Press ‘GO’
Manual Depart
Press GO
Press the down
Scroll arrow
Entry 1: Docking
Pres GO for next
Press ‘GO’ - Mower will
start to follow the perimeter
Entry 2 of 4
Pres GO to set
Follow the mower and
Press ‘GO’ at the point
you want to set
Entry 3 of 4
Pres GO to set
Press ‘GO’ for other points
or leave the mower to
complete the edge
11:28 Mo10:30E
Press GO
11:28 Mo10:30E
Press GO
Press ‘GO’
Docking options
Press GO
Press ‘GO’
Docking options
Press GO
Scroll until ‘Entry Points’
is displayed
Time: Mo 11:55
Press GO
Entry Points
Press GO
Press ‘GO’
Set Entry Points
Pres GO to learn
Press ‘GO’
Manual Depart
Press GO
Press the down
Scroll arrow
Entry 1: Docking
Pres GO for next
Press ‘GO’ - Mower will
start to follow the perimeter
Entry 2 of 4
Pres GO to set
Follow the mower and
Press ‘GO’ at the point
you want to set
Entry 3 of 4
Pres GO to set
Press ‘GO’ for other points
or leave the mower to
complete the edge
11:28 Mo10:30E
Press GO
11:28 Mo10:30E
Press GO
One of the following displays is appeared
when the mower is in the Docking Station
Press ‘GO’
Docking options
Press GO
Press ‘GO’
Docking options
Press GO
Scroll until ‘Entry Points’
is displayed
Weekly program
Press GO
Entry Points
Press GO
Press ‘GO’
Set Entry Points
Pres GO to learn
Press ‘GO’
Manual Depart
Press GO
Press the down
Scroll arrow
Entry 1: Docking
Pres GO for next
Press ‘GO’ - Mower will
start to follow the perimeter
Entry 2 of 4
Pres GO to set
Follow the mower and
Press ‘GO’ at the point
you want to set
Entry 3 of 4
Pres GO to set
Press ‘GO’ for other points
or leave the mower to
complete the edge
11:28 Mo10:30E
Press GO
11:28 Mo10:30E
Press GO
Notes: 1. It is not necessary to set all 4 points, if you find that 2 or 3 points are enough to your lawn,
you can stop the mower at any time in the process.
2. There is no need to wait until the mower will complete the drive back to the Charging Station;
you can stop the mower at any time you want during the ‘Set entry points’ process by
pressing the STOP button.
Figure 6.11
Setting Entry Points
Back to default
Selecting ‘Back to default’ restores the factory default entry points – there is no distance in the
memory and the mower should complete the lawn’s edge at least once before it will use the default of
30% and 60% percentages of the perimeter as entry points.
To set this option follow the steps appeared in Figure 6.11.
Entry Points - on/off
Allows user not to use the entry points. When setting the ‘Entry points’ to ‘off’ the mower will always
start the mowing of the inner area from the Charging Station. It is recommended to set the entry points
to ‘off’ when the lawn shape is square or rectangle with no narrow passes.
To set this option follow the steps described in Figure 6.11.
6.4.2 Auto Depart
Allows user to shut off the weekly program when setting the ‘Auto depart’ to ‘off’.
57
To Next Page
Loading...
