Address: Room 1705,Block A1, Longyuan Plaza, Longkouxi Road, Guangzhou, China, 510640 Website: http://www.arm9.net
Sales: +86-20-85201025 Tech Support: +86-13719442657 Fax: +86-20-85261505
Email for Business and Cooperation: capbily@163.com Email for Tech Support: dev_friendlyarm@163.com
1.7.13 CMOS Camera
The TinySDK/ADK 1312B and Smart210 SDK 1305 have a CMOS camera interface
which is a 2.0mm spacing 20 pin header. Users can use our CAM130 cameras by
connecting it to this header. Actually the CAM130 doesn’t have any circuits and it is a
conversion board which applies the ZT130G2 module.
Note: the CAMER interface is a multiplexed port which can be used as a GPIO by
setting corresponding registers. The table below shows its GPIO pins. In addition the
CMOS Camera interface is also connected to a TVP5150 chip. Users can select either
CCD or CMOS by jumping J3 to different positions.
Please refer to the schematics in the shipped CD for the exact connection details between each pin and CPU. The
information provided here is for reference
To Next Page
Loading...
