To Next PageTo Next Page
Need help?Do you have a question about the FriendlyARM Tiny210 and is the answer not in the manual?
Details the CPU, DDR2 RAM, Flash, and Connector specifications.
Lists the pin assignments for the Tiny210 CPU board connectors.
Details the CPU, DDR2 RAM, Flash, and Connector specifications.
Lists the pin assignments for the Smart210 CPU board connectors.
Details the carrier board's interfaces like Power, Serial, USB, and Audio.
Describes the available serial ports (UART0-3) and their configurations.
Details the USB Host (2.0) and USB Slave (MiniUSB 2.0) interfaces.
Provides an overview of the Mini210S board's architecture and key components.
Details the CPU, DDR2 RAM, Flash, and other hardware specifications.
Detailed description of each port and interface on the Mini210S board.
Details the four serial ports (UART0-3) and their configurations.
Explains the USB Host (2.0) and miniUSB (OTG) interfaces.
Details the features of Android 2.3.1, including cross-compiler and kernel.
Details the features of Android 4.0.3, including cross-compiler and system.
Details the features of Linux, including cross-compiler and kernel.
Details the features of Windows CE 6.0, including Superboot and BSP.
Covers boot options and system setup procedures.
Guides on installing and using Android on the device.
Steps to set up the Android development environment on Windows and use ADB.
How to use the libfriendlyarm-hardware.so library to access board resources.
Steps to install Visual Studio 2005, patches, and Windows CE 6.0.
General| CPU | Samsung S5PV210 |
|---|---|
| CPU Frequency | 1 GHz |
| RAM Type | DDR2 |
| Operating System | Android, Linux |
| RTC | Yes |
| Buzzer | Yes |
| Power Supply | 5V DC |
| RAM | 512MB |
| Storage | NAND Flash |
| Ethernet | 10/100M |
| USB OTG | 1 x USB 2.0 |
| Serial Port | Yes |
| Audio Output | 3.5mm jack |
| SD Card Slot | Yes |
| LCD Interface | Yes |
| Camera Interface | Yes |
| Touchscreen Interface | Yes |
| Video Output | LCD |
