FriendlyARM Mini210S - CMOS Camera

Address: Room 1705,Block A1, Longyuan Plaza, Longkouxi Road, Guangzhou, China, 510640 Website: http://www.arm9.net
Sales: +86-20-85201025 Tech Support: +86-13719442657 Fax: +86-20-85261505
Email for Business and Cooperation: capbily@163.com Email for Tech Support: dev_friendlyarm@163.com
第 - 59 - 页
CON9
Pin Spec
CON9
Pin Spec
1
VDD_3.3V
2
GND
3
WIFI1_RST_GPIO/GPJ4_4
4
WIFI1_PWR_ONOFF/JPJ4_2
5
I2CSCL0
6
I2CSDA0
7
SPI0_MOSI0
8
SPI0_MISO0
9
SPI0_CLK0
10
SPI0_CS0
11
WIFI1_IO/GPJ4_1
12
WIFI1_PD_GPIO/GPJ4_3
13
MMC3_CLK
14
MMC_CMD2
15
MMC_CDn2
16
WIFI1__nWP
17
MMC3_DAT0
18
MMC3_DAT1
19
MMC3_DAT2
20
MMC3_DAT3
Please refer to the schematics in the shipped CD for the exact connection details between each pin and CPU. The
information provided here is for reference
2.3.17 CMOS Camera
The CMOS camera interface is extended to CON10. It is a 2.0mm 20 pin connector.
Users can directly connect to a CAM130 camera. Actually the CAM130 doesn’t have
any circuits and it is a conversion board which is mounted with a ZT130G2 module.
Note: The CMOS camera interface is a multiplexed port which can be used as a GPIO
by setting corresponding registers. The table below shows its GPIO pins.