10. OK
During programming, pressing the OK key confirms the selection of
the entry of the menu or the value of the parameter.
11. REDUCE HEAT / CANCEL
This button has 3 functions:
4. During any operative phase of the appliance, pressing the
“REDUCE HEAT" key reduces the water bath fluid (glycol)
temperature, from 120°C to 98°C. Selection of the heat
reduction function is signalled by the flashing indicator of the
OK key.
Press the ”REDUCE HEAT” key again to restore the fluid at a
maximum temperature of 120°C.
5. During programming, pressing the CANCEL key cancels the
selection of the entry of the menu or the value of the parameter.
6. With the machine in STOP, by pressing CANCEL repeatedly, it
is possible to read the temperatures of the auxiliary tank, the
fluid and tank in sequence.
12. UP
This button has 2 functions:
3. While a cycle is being executed, pressing the UP key increases
the rotation speed of the beater motor.
4. During programming, by pressing the UP button, it is possible to
scroll the menu entries or to increase value of the selected
parameter.
To Next Page
Loading...
