6.3.1 “CREAM” RAPID SEMI-AUTOMATIC CYCLE
Press the “CREAM” key to enter the screen of the following parameters
relative to the work cycle:
- MIXING (from 0’ to 20’)
The first item, automatically selected, concerns
high speed mixing function (S8) of the ingredients.
The user can program the total duration of this
phase by selecting times up to 20'.
Press “UP” and “DOWN” to increase or decrease
the mixing time value.
Press “OK” to confirm the data and pass to
programming the next item.
- HEATING (from 1° to 115°)
After having programmed the mixing time, it is
possible to set the heating temperature of the
product in the tank.
Press “UP” and “DOWN” keys to increase or
decrease the heating temperature value.
Press “OK” to confirm the data and pass to
programming the next item.
- PAUSE (from 0’ to 10 h)
After having programmed the heating
temperature, a stand-by time can also be set,
during which this temperature is kept constant.
Press “UP” and “DOWN” keys to increase or
decrease the stand-by time value.
Press “OK” to confirm the data and pass to
programming the next item.
To Next Page
Loading...
