Fromm AP250 - Inserting Film into the Guide; Fitting Film Edges into Guide; Film Insertion Under Safety Housing; Closing Transport Rollers

13
50302501manen.f
Copying all or part of this manual in any way or form is prohibited without prior written consent from its author. © 2012
website: www.fromm-pack.com
18.5 Inserting in the guide
18.5.1
Open the two edges of the film and fit them around
the guide.
18.5.2
IMPORTANT:
Insert the film under the safety housing by routing it
between the rubberized transport rollers.
Ensure that lever A is in the position shown in the
photo (transport rollers open).
18.5.3
Turn lever A as in the photo (transport rollers
closed).