7
50302501manen.f
Copying all or part of this manual in any way or form is prohibited without prior written consent from its author. © 2012
website: www.fromm-pack.com
8 EXPLANATION OF MACHINE IDENTIFICATION LABEL
An identification label containing the following information is affixed to the rear door of the machine.
Please immediately contact the manufacturer if the label is damaged.
Manufacturer name: FROMM Slovakia AS
Machine type: AP250
Serial number: Manufacturer's serial number.
Power supply: 230V 50/60 Hz.
Power used: 0,6 kW
Breaking fuse: 10 Amp
Year of manufacture: Year in which the machine was produced by the manufacturer.
9 MACHINE TECHNICAL SPECIFICATIONS
CAUTION: do not use film that has not been supplied by FROMM, or that is of a
different thickness than specified without contacting the manufacturer prior.
Machine
Dimensions Width 410 mm
Length 768 mm
Height (without film roll) 510 mm
Weight Total weight (without film roll) approx. 43 kg
Conditions Operating temperature
+ 5 to +30
o
C
Operating environment clean, dry
Electricity Power supply 230 V 50/60Hz
Rated power 1.1 kVA
Power used approx. 0.6 kW
Film Film width max. 210mm
Type of film PE/PE - PE/PA
Film thickness 20 - 50 µm
Real dimension of (single layer) film Øint. 76mm
Øest. 280mm max.
Manufacturer
Machine code
Serial number
Year of manufacture
Volts / Hz
Power used
Breaking fuse
To Next Page
Loading...
