21
50302501manen.f
Copying all or part of this manual in any way or form is prohibited without prior written consent from its author. © 2012
website: www.fromm-pack.com
23 INFORMATION REGARDING NOISE
For similar machines, noise has been measured during production using 25 micron film, at 1.6 m from the
ground and at 1.5 meters from the machine. The following maximum values were measured:
These values may vary by a maximum of 5% due to environmental and production factors.
24 GENERAL SAFETY INFORMATION
Never start the machine without having first read the Instruction Manual and been trained by
qualified personnel.
The user must always comply with local health and safety norms that apply in the country in which
the machine is installed.
Warning and prohibited action decals on the machine
The following warning and prohibited action decals are located on the machine and/or accessories.
Caution, moving parts, do not remove the safety devices.
Caution, danger: presence of components that may crush or cut.
Caution, danger: hot surfaces.
Do not perform any operations before disconnecting machine voltage.
E14
Power supply anomaly. Call Technical Assistance and indicate the error
number.
E15
Check fan rotation speed. The filling fan is not working, or its speed has been
set too low.
E16
Excessively high temperature. One of the heat-seal
bars has reached an excessive temperature and
the safety devices have been activated.
Call Technical Assistance and indicate the error
number.
Continuous sound level pressure
(SLP) equivalent weighted A Leq db (A) < 70
Code Cause Action
To Next Page
Loading...
