Fronius CMT Twin - Page 34

34
"Actual values" screen
- The 1st screen in the wizard appears
("Actual values")
Press F2 "Forward"
"Preparations" screen
- The 2nd screen in the wizard appears
("Preparations")
Follow the instructions given in the
"Preparations" screen
Press F2 "Forward":
"L/R alignment" screen
- LR alignment is started, the 3rd screen
in the wizard appears ("L/R alignment")
4
NOTE! The contact between the
earthing clamp and workpiece
must take place on a cleaned
workpiece surface.
5
6