(7) Adjusting dial
for continuous adjustment of the selected setting value (1)
(8) Status indicators
display various operating modes of the welding system:
-
VRD
lights up when the safety device for voltage reduction is
activated (VRD devices only)
-
Setup
lights up in Setup mode
-
Temperature
lights up when the device is outside the permissible tem-
perature range
-
Fault
lights up in the event of a fault, also see section
‘Troubleshooting’
-
TAC
lights up when the tacking function is activated
(only possible on TIG devices with the TIG welding pro-
cess)
25
EN
To Next Page
Loading...
