Fronius Ignis 150 - TIG Welding; TIG Welding Preparation and Gas Connection

TIG welding
General
NOTE!
Do not use pure tungsten electrodes (colour-coded green) if the TIG welding
process has been selected.
Connecting the
gas cylinder
WARNING!
Danger from falling gas cylinders.
This can result in serious injury and damage to property.
▶
Place gas cylinders on a solid, level surface so that they remain stable. Se-
cure gas cylinders to prevent them from falling over.
▶
Observe the safety rules of the gas cylinder manufacturer.
1
Preparation
1 2
31
EN