General
Device concept The welding system has the following
properties:
-
Compact dimensions
-
Robust plastic housing
-
Extremely reliable even under
harsh operating conditions
-
Carrying strap for easy transport
on construction sites, etc.
-
Protected controls
-
Current sockets with bayonet latch
In conjunction with the digital resonance inverter, an electronic regulator adapts
the welding system characteristic to suit the welding electrode during welding.
The result is a lightweight and compact device with excellent ignition and weld
properties.
The welding system also features a ‘Power Factor Correction’, which adapts the
current consumption of the welding system to the sinusoidal mains voltage. This
results in numerous advantages for the user, such as:
-
Low primary current
-
Low conduction losses
-
Late tripping of the automatic circuit breaker
-
Improved stability in the event of voltage fluctuations
-
Long mains leads can be used
-
In the case of multivoltage devices, a continuous input voltage range.
When using cellulose electrodes (CEL), a dedicated operating mode can be
chosen for perfect welding results.
Warning notices
on the device
The warning notices and safety symbols on the welding system must not be re-
moved or painted over. They warn against incorrect operation which can lead to
serious injury and damage.
Meaning of safety symbols on the device:
Welding is dangerous. The following basic requirements must be
met to ensure the equipment is used properly:
-
Welders must be sufficiently qualified
-
Suitable protective equipment must be used
-
All persons not involved must be kept at a safe distance from
the welding process
17
EN
To Next Page
Loading...
