Welding process Setup menu
Accessing the
Setup menu
1
Use the Welding Process button to select the process whose
Setup parameters are to be changed:
-
MMA welding
-
MMA welding with Cel electrode
-
TIG welding
2
Press the Setting Value and Welding Process buttons at the same
time
-
The code for the first parameter in the Setup menu is dis-
played on the control panel
Changing weld-
ing parameters
1
Turn the adjusting dial to select the required parameter
2
Press the adjusting dial to display the preset value of the parameter
3
Turn the adjusting dial to change the value
-
the new value becomes effective immediately
-
exception: when restoring the factory settings, press the adjust-
ing dial after changing the value to activate the new value.
4
Press the adjusting dial to return to the list of parameters
Exiting the
Setup menu
1
Press the Setting Value or Welding Process button to exit the
Setup menu
Parameters for
MMA welding
Para-
meter Description Range Unit
Starting current duration
For the SoftStart / HotStart function
Factory setting: 0.5 seconds
0.1 - 2.0 Second
s
36
To Next Page
Loading...
