Contents
Safety rules 5
Explanation of safety notices 5
General 5
Proper use 6
Environmental conditions 6
Obligations of the operator 6
Obligations of personnel 6
Mains connection 7
Residual current protective device 7
Protecting yourself and others 7
Noise emission values 8
Danger from toxic gases and vapours 8
Danger from flying sparks 9
Risks from mains current and welding current 9
Meandering welding currents 10
EMC Device Classifications 10
EMC measures 11
EMF measures 11
Specific hazards 11
Requirement for the shielding gas 12
Danger from shielding gas cylinders 13
Safety measures at the installation location and during transport 13
Safety measures in normal operation 14
Commissioning, maintenance and repair 14
Safety inspection 15
Disposal 15
Safety symbols 15
Data protection 16
Copyright 16
General 17
Device concept 17
Warning notices on the device 17
Application areas 18
Before commissioning 19
Safety 19
Intended use 19
Setup regulations 19
Generator-powered operation 20
Controls, connections and mechanical components 21
Safety 21
Ignis 150 controls, connections and mechanical components 22
Ignis 180 controls, connections and mechanical components 23
Control panel 24
MMA welding 26
Preparation 26
MMA welding 27
SoftStart / HotStart function 27
Arc-force dynamic 28
Pulse welding 29
TIG welding 31
General 31
Connecting the gas cylinder 31
Preparation 31
Setting the gas pressure on the welding torch with gas cut-off valve 33
TIG welding 33
TIG Comfort Stop 33
Welding process Setup menu 36
Accessing the Setup menu 36
Changing welding parameters 36
Exiting the Setup menu 36
3
EN
To Next Page
Loading...
