Fronius Ignis 150 - Disposal Guidelines

56 pages

To Next Page

To Previous Page

Maintenance

every 2 months

Clean air filter:



Disposal Dispose of in accordance with the applicable national and local regulations.

Main Page

Table of Contents3
Safety Rules5
Explanation of Safety Notices5
General5
Proper Use6
Environmental Conditions6
Obligations of the Operator6
Obligations of Personnel6
Mains Connection7
Residual Current Protective Device7
Protecting Yourself and Others7
Noise Emission Values8
Danger from Toxic Gases and Vapours8
Danger from Flying Sparks9
Risks from Mains Current and Welding Current9
Meandering Welding Currents10
EMC Device Classifications10
EMC Measures11
EMF Measures11
Specific Hazards11
Requirement for the Shielding Gas12
Danger from Shielding Gas Cylinders13
Safety Measures at the Installation Location and During Transport13
Safety Measures in Normal Operation14
Commissioning, Maintenance and Repair14
Safety Inspection15
Disposal15
Safety Symbols15
Data Protection16
Copyright16
General17
Device Concept17
Warning Notices on the Device17
Application Areas18
Before Commissioning19
Safety19
Intended Use19
Setup Regulations19
Generator-Powered Operation20
Controls, Connections and Mechanical Components21
Safety21
Ignis 150 Controls, Connections and Mechanical Components22
Ignis 180 Controls, Connections and Mechanical Components23
Control Panel24
MMA Welding26
Preparation26
MMA Welding27
Softstart / Hotstart Function27
Arc-Force Dynamic28
Pulse Welding29
TIG Welding31
General31
Connecting the Gas Cylinder31
Preparation31
Setting the Gas Pressure on the Welding Torch with Gas Cut-Off Valve33
TIG Welding33
TIG Comfort Stop33
Welding Process Setup Menu36
Accessing the Setup Menu36
Changing Welding Parameters36
Exiting the Setup Menu36
Parameters for MMA Welding36
Parameters for TIG Welding38
Setup Menu - Level 239
Welding Parameters in the Level 2 Setup Menu39
Care, Maintenance and Disposal41
Safety41
General41
Maintenance at Every Start-Up41
Maintenance Every 2 Months42
Disposal42
Troubleshooting43
Safety43
Indicated Errors43
Service Messages43
No Function45
Faulty Operation46
Average Consumption Values During Welding48
Average Wire Electrode Consumption During MIG/MAG Welding48
Average Shielding Gas Consumption During MIG/MAG Welding48
Average Shielding Gas Consumption During TIG Welding48
Technical Data49
Explanation of the Term "Duty Cycle49
Ignis 15049
Ignis 18050
Ignis 180 MV51
Overview with Critical Raw Materials, Year of Production of the Device53

Fronius Ignis 150 - Disposal Guidelines

Table of Contents

Related product manuals