OFF (TP
180 MV
only)
180 A 220 A 40%
120 V* 15 A 85 A 130 A 40%
16 A 95 A 140 A 40%
20 A (TP
180 MV
only)
120 A 170 A 40%
OFF (TP
180 MV
only)
120 A 170 A 40%
* Depending on the triggering characteristic of the automatic circuit breaker,
the full duty cycle of 40% cannot be achieved on 120 V grids (e.g. USA circuit
breaker type CH 15% D.C.)
Paramet-
er Description Range Unit
Operating time (System on time)
For displaying the operating time (begins
to count as soon as the device is switched
on)
The full operating time is spread across a
number of displays and can be retrieved
by turning the adjusting dial
Hours,
minutes,
seconds
Welding time (System Active time)
For displaying how long the system has
been active for (only shows the time dur-
ing which welding was in progress)
The full system active time is spread
across a number of displays and can be
retrieved by turning the adjusting dial
Hours,
minutes,
seconds
40
To Next Page
Loading...
