Fronius SYMO Series Service Manual & Spare Parts List

108
Replacing other
components
WARNING!
Follow the safety rules (see start of "Safety" chapter)
If the following components are faulty, the complete inverter must be replaced:
- Housing parts (except lid)
- Inductors
- Heat sink
- Seals (except the seal on the lids)
The lids (DATCOM lid and power module lid) can be replaced as an assembly with sprayed
seal.

Fronius SYMO Series Specifications

General

MPPT Number	2
Frequency Range	50 / 60 Hz
Operating Temperature Range	-25°C to +60°C
Communication	WiFi, Ethernet, RS485
AC Nominal Voltage	3 x 230 V / 400 V
Output Voltage	3 x 230 V / 400 V
Warranty	5 years