Fronius TransPocket 5000 CEL - The Set-Up Menu: Level 2; General Remarks; Changing the Parameter; Exit the Set-Up Menu

27
EN
The functions Eln (electrode-line selection), r (welding circuit resistance), L (indication
of welding circuit inductivity) and ASt (anti-stick) are located in a second menu level.
Changing to the second menu level (2nd)
- Choose the parameter “2nd”, as described in the section headed “The Set-up
menu: Level 1”
- Press and hold the Setup / Store button (7)
- Press process button (3)
- Release the Setup / Store button (7)
The power source is now in the second menu level (2nd) of the setup-menu. The
function “Eln” (electrode-line selection) is now displayed.
The Set-up Menu: Level 2
General remarks
1. Press the Setup / Store button (7)
NOTE! Any alterations you have
made will be stored in the memo-
ry when you exit the Level 2 of
the Set-up Menu (2nd).
NOTE! The complete list of
parameters for Level 2 of the
Set-up Menu (2nd) is explained
in the section headed “Parame-
ters 2nd”.
Changing the
parameter
- Use the Process button (3) to select the desired parameter
- Use the adjusting dial (1) to alter the value of the parameter
Fig.32 Level 2 of the Set-up Menu (2nd)
Exit the set-up
menu