Fronius VR 5000 - Manual Control Panel Settings Tables

109
EN
Manual control panel settings tables
Settings tables - Shielding gas: Argon + CO
2
*
- Material: G3 Si 1
- Wire diameter: 0.8 mm (.03 in.)
- Ignition current: 400 A
- Shielding gas: Argon + CO
2
*
- Material: G3 Si 1
- Wire diameter: 0.9 mm (.035 in.)
- Ignition current: 450 A
- Shielding gas: Argon + CO
2
*
- Material: G3 Si 1
- Wire diameter: 1.0 mm (.04 in.)
- Ignition current: 500 A
Sheet thickness Wire feed speed Welding voltage Dynamic
0.8 mm (.03 in.) 2.1 m/min (82.68 ipm) 13.7 V 4
1 mm (.04 in.) 2.8 m/min (110.24 ipm) 15.8 V 4
1.5 mm (.06 in.) 5.9 m/min (232.28 ipm) 17 V / 3
2 mm (.08 in.) 6.5 m/min (255.91 ipm) 18 V 3
3 mm (.12 in.) 10.8 m/min (425.20 ipm) 20 V 2
4 mm (.16 in.) 14 m/min (551.18 ipm) 23.4 V 1
5 mm (.2 in.) 16.7 m/min (657.48 ipm) 27 V 0
6 mm (.24 in.) 19 m/min (748.03 ipm) 27.8 V 0
8 mm (.31 in.) 21 m/min (826.77 ipm) 30.4 V 0
10 mm (.39 in.) 23 m/min (905.51 ipm) 32.6 V 0
12 mm (.47 in.) 25 m/min (984.25 ipm) 34 V 0
Sheet thickness Wire feed speed Welding voltage Dynamic
0.8 mm (.03 in.) 1.6 m/min (62.99 ipm) 13.3 V 4
1 mm (.04 in.) 1.9 m/min (74.8 ipm) 14 V 4
1.5 mm (.06 in.) 2.5 m/min (98.43 ipm) 15 V 3
2 mm (.08 in.) 4.5 m/min (177.17 ipm) 16.5 V 3
3 mm (.12 in.) 6.2 m/min (244.09 ipm) 17 V 2
4 mm (.16 in.) 7.5 m/min (295.28 ipm) 19.5 V 2
5 mm (.2 in.) 11 m/min (433.07 ipm) 24 V 1
6 mm (.24 in.) 12.4 m/min (488.19 ipm) 25.5 V 0
8 mm (.31 in.) 13 m/min (511.81 ipm) 26 V 0
10 mm (.39 in.) 16 m/min (629.92 ipm) 28 V 0
12 mm (.47 in.) 19.1 m/min (751.97 ipm) 30 V 0
15 mm (.59 in.) 22 m/min (866.14 ipm) 32 V 0
20 mm (.79 in.) 25 m/min (984.25 ipm) 34 V 0