Fronius VR 5000 - Level 2 Setup Menu Operations

86
Setup menu - Level 2
Level 2 setup
menu - manual
control panel
Accessing the setup menu
The control panel is now in the setup menu - the last setup parameter that was selected is
displayed.
Selecting the "2nd" parameter
Accessing the Level 2 setup menu
Changing welding parameters
Exiting the Level 2 setup menu
Exiting the setup menu
Level 2 setup
menu - Synergic
control panel
Accessing the setup menu
Press and hold the "Mode" button
Press the "Process" button
Release the "Mode" and "Process" buttons
Use the "Mode" and "Process" buttons to select the "2nd" setup
parameter
Press and hold the "Mode" button
Press the "Process" button
Release the "Mode" and "Process" buttons
Use the "Mode" and "Process" buttons to select the required set-
up parameter
Use the "Dynamic" buttons to change the value of the setup pa-
rameter
Press and hold the "Mode" button
Press the "Process" button
Release the "Mode" and "Process" buttons
Press and hold the "Mode" button
Press the "Process" button
Release the "Mode" and "Process" buttons
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Press and hold the "Mode" button
1