32
Synergic control panel
General The power source uses the Synergic control panel and certain general items of data such
as sheet thickness, filler metal, wire diameter and shielding gas to calculate the best weld-
ing parameters. As a result, stored knowledge is available at all times. All the parameters
can be adjusted manually. The Synergic control panel also allows parameters to be set
manually.
Control panel
splitting
The Synergic control panel is split.
Synergic A con-
trol panel
(9)
(8)
(7)
(4)
(6) (5)
(3)
(2)
(1)
(10)
To Next Page
Loading...
