22
Welding is dangerous. The following
basic requirements must be met:
- Welders must be sufficiently quali-
fied
- Suitable protective equipment
- Keep all persons not involved in
the welding process at a safe dis-
tance
Do not use the functions described here
until you have thoroughly read and un-
derstood the following documents:
- these operating instructions
- all the operating instructions for the
system components, especially
the safety rules
1.0-25 m/min
360A/100% 450A/60% 500A/40%
I
2
4.0 A
I
11
U11
24 V
U
12 I12 2.0 A24 V
IP 23
IEC 60 974-5/-10 Cl.A
A-4600 Wels
www.fronius.com
Model No.
Ser. No.
Part No.
40,0006,3035
To Next Page
Loading...
