Appendix-2
Ver.1.36
VF tube N-70, includes each 1 pcs of Vent-free tube 0.15mm id / 70cm,
graphite vespel ferrule, VF metal ferrule D and VF nut B and 1/16 nut (SS), 1
set. For Thermo TRACE Ultra/Focus GC/MS
VF tube N-70, includes each one of Vent-free tube 0.15mm id / 70cm, VF
metal ferrule D (2 ea) and VF nut B (2 ea), For PerkinElmer Clarus series
VF metal ferrule D, for column connection, 20 ea
Deactivated metal capillary tube for evolved gas analysis (Ultra ALLOY 2.5 m,
id. 0.25 mm, od. 0.47 mm, with bobbin).
5. Double-Shot / Single-Shot Sampler related parts
Sample cup chuck for Single and Double-Shot samplers, 1 ea
Chuck base for Single and Double-Shot samplers, 1 ea
For purge valve of Double-Shot sampler, 20 ea
6. Magic Chemisorber (solid phase extraction element)
100% dimethylpolysiloxane, df=500 µm, length 6 mm, contains 10 pcs.
Magic Chemisorber S500 kit
Eco-stick DF 5 pcs, Magic Chemisorber S500, 3 pcs,
Flow through Eco-cup LHF, 5 pcs.
100% dimethylpolysiloxane, df=500 µm, length 30 mm, contains 5 pcs.
Magic Chemisorber L500 kit
Eco-stick DF 5 pcs, Magic Chemisorber L500, 3 pcs,
Protection tube for Magic Chemisorber L500, 2 pcs.
100% dimethylpolysiloxane, df=100 µm, length 30 mm, contains 5 pcs.
Magic Chemisorber L100 kit
Eco-stick DF 5 pcs, Magic Chemisorber L100, contains 3 pcs.
Protection tube for Magic Chemisorber L, contains 2 pcs.
Magic Chemisorber S500, L500, L100, each 2 pcs.
Magic Chemisorber protection
tube
Protection tube for Magic Chemisorber L, contains 2 pcs.
7. Harris Micro Puncher (tool used to easily punch out discs from a thin sheet of sample)
Disc size 0.50 mmΦ, contains 3 pcs., cutting mat L 1pc
Disc size 0.75 mmΦ, contains 3 pcs., cutting mat L 1pc
Disc size 1.25 mmΦ, contains 3 pcs., cutting mat L 1pc
Disc size 2.00 mmΦ, contains 3 pcs., cutting mat L 1pc
includes each 3 pcs of Micro-puncher 0.75 / 1.25 / 2.0 mmΦ and 2 sheets of
cutting mats L 65x75mm/green, 1 set
Disc size 3.00 mmΦ, contains 3 pcs., cutting mat L 1pc
Disc size 4.00 mmΦ, contains 3 pcs., cutting mat L 1pc
Disc size 5.00 mmΦ, contains 3 pcs., cutting mat L1pc
includes each 3 pcs of Micro-puncher 3.0 / 4.0 / 5.0 Φmm and 2 sheets of
cutting mats L 65x75mm/green, 1 set
8. Consumables set (one year’s worth)
Consumables set 3030D
( for EGA/PY-3030D)
Eco-cup SF, Eco-cup LF, Eco-stick SF, Eco-stick DF, Eco stand AL, Quartz
pyrolysis tube A30, Needle set N, 6 mm graphite Vespel ferrule, Eco-pickup F,
Septum (for liquid sampler)
Consumables set 3030S
( for PY-3030S)
Eco-cup SF, Eco-cup LF, Eco-stick SF, Eco stand AL, Quartz pyrolysis tube
A30, Needle set N, 6 mm graphite Vespel ferrule, Eco-pickup F, Septum (for
liquid sampler)
Consumables set 3030AS
( for PY-3030 and AS-1020E)
Eco-cup LF, Eco-Cup stand 10, Quartz pyrolysis tube A30, Needle set N, 6
mm graphite Vespel ferrule, ITF Union ASN
Tool to pulverize polymer samples for Py-GC、 FT-IR、XRD measurement,
contains 3 pcs, with one cleaning tape (2 m)
Cleaning tape for Polymer Prepper (2 m), set of 3.
Part name marked with ○ is required for daily maintenance.
Part name marked with M is recommended replacement at periodic maintenance (biannually or annually).
To Next Page
Loading...