4-17
Ver.1.36
4.4 OTHER FUNCTIONS
4.4.1 Saving/loading analysis set-ups
The set-up methods can be saved using a filename. When all the set-ups are completed, choose
“File” – “Save As”, and type in a filename to save the set-ups in a file. As shown in Table 4.1, a suffix
is added automatically to the filename. The suffix depends on the analytical mode. For example, in
the case of the Single-Shot analysis, if the filename is specified as Test.mtd, the actual filename
saved will be Test_SS.mtd. To overwrite a file with the current file, select “File” – “Save”.
4.4.2 Temperature calibration of the pyrolyzer furnace and other set-ups
From the menu bar, choose “Tools” – “Maintenance”. A dialog box shown in Fig. 4.21 is displayed.
Type in “3030” for password, and press the “OK” button. The set-up screen shown in Fig. 4.22 will be
displayed.
Fig. 4.21 Entering password
Table. 4.1 Suffix added to filename
To Next Page
Loading...
Need help?
General