EasyManua.ls Logo

FTE Maximal MAX S123 HD - Technical Specifications

FTE Maximal MAX S123 HD
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PAG.
42
rev 1.1
ENGLISH
TECHNICAL SPECIFICATION
9. TECHNICAL SPECIFICATION
VIDEO
Decoding
Bit rate
Aspect ratio
Active pixel (Scart, RCA)
Active pixel (HDMI)
Output connector
MPEG-2 SD&HD, MEPG-4 H.264/AVC SD&HD
Max.20 Mbps
4:3PS, 4:3LB, 16:9, Auto
AUTO, 720 x 576 @25fps, 720 x 480 @30fps
AUTO, TV,
480I, 480P, 576I, 576P, 720P_50, 720P_60,
1080I_25, 1080I_30, 1080P_50, 1080P_60, 1080P_25,
1080P_30 or 1080P_24
HDMI / Scart / RCA
AUDIO
Decoding
Mode
Bit rate
Output connector
MPEG-2/MPEG-1 layer I, II & III, Dolby Digital, Dolby Digital+
Mono, Dual, Stereo, Joint stereo
Max 384Kbps
HDMI / Scart / RCA / Coaxial SPIDF
DEMODULATOR
Demodulation
Multiplexing
Outer code
Inner code
Energy dispersion
QPSK, 8PSK
SCPC/MCPC
RS (204, 188, 8)
ALL DVB rates
DVB-S & DVB-S2 recommendation
INPUT SIGNAL
Frequency
Input level
Channel bandwidth
Input socked
950MHz ~ 2150MHz
-65dBm ~ -25dBm
36MHz
F-type connector
LNB CONTROL
Power supply
Polarized control
DiSEqC control
Unicable System
13/18V (300mA max) with short circuit protection
Polarized control 13/18V polarization (V/H)
DiSEqC1.0, DiSEqC1.1 and DiSEqC1.2, GoToX *
* This receiver does not allow moving Diseq motors
Yes
MISCELLANEOUS
USB Connector
External IR connector
Supply voltage
External power supply
Stand-by power consumption
(Low Power Consumption mode)
Power consumption
Operation temperature
Storage temperature
Dimension (W x D x H)
Weight
USB 2.0
3,5 mm Mini-Jack. External sensor not included,
(optional accessory, code SPX409)
12V DC, 1,5A Max.
100~240VAC~50~60Hz
< 0,5 watt
Max. 6 watts
+5° to +40°
-20° to +70°
160 x 140 x 45 mm
0.66 Kg

Related product manuals