5-9
P codes: Motor Parameters
H codes: High Performance Functions
*2 "Fuji's standard torque boost," "Nominal rated current of Fuji standard motor," and "Nominal rated capacity of
Fuji standard motor" differ depending upon the rated input voltage and rated capacity. Refer to Table 5.1 "Fuji
Standard Motor Parameters" on page 5-12.
(Note) Function code P14 is valid on inverters with ROM version C1S11100 or later. (The lowest four digits of the
ROM version can be displayed on the LED monitor. For details, refer to Chapter 3, Section 3.2.2 [5]
"Reading Maintenance Information.")
To Next Page
Loading...
