Chapter 2 Description of Functions
63
[ 3 ] Change of definition file
"Definition file" of the function code list is a one-to-one correspondence to the inverter ROM
version. The inverter ROM version is displayed in the "MAIN" on the fifth page of the Key pad of
the "5. Maintenance". (Refer to the operation manual "3.4.6 See maintenance information" of the
main part of an inverter for operation.)
When checking by a loader, Check an "M25 : Inverter ROM (main control) version" after reading
function code data from an inverter.
Shows the relationship between the "Inverter ROM version" and "Definition file" below.
Inverter ROM version Definition file
Key pad display : H10011
Loader M25 display : 0x11
fnc_E_vg_1_0000b30a.csv
Key pad display : H10012
Loader M25 display : 0x12
fnc_E_vg_1_0000b33.csv
When changing the "definition file" of the current function code list, click [change] button and
displays the dialog "Open file."
To Next Page
Loading...
