Fuji Electric MICREX-SX series SPF - Page 110

App.2-5
Appendix 2 Automatic Update of System Software

Click the [OK] button and conrm that the SPF has been updated to the latest version.

Click the [Exit] button to power off the SPF.
<When selecting “No” on the dialog box saying “System software is not latest. Do you update?”>

When selecting “No” on the dialog box saying “System software is not latest. Do you update?”, the following dialog box
appears.
• When “Yes” is selected: When you attempt to display the “Control” dialog box next time, the update conrmation dialog
box appears again. If you want to update the system software later, click the [Yes] button.
• When “No” is selected: The update conrmation dialog box will not appear from the next time.
(To display it again, reinstall the loader.)