EasyManua.ls Logo

Fuji Electric MONITOUCH TS Series - General, Environmental, and Mechanical Specs

Fuji Electric MONITOUCH TS Series
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
1. Specifications 2-1
Specifications
1. Specifications
General Specifications
*1 Use MONITOUCH in the environment whose wet-bulb temperature is 39 °C or less. Otherwise, MONITOUCH
may be damaged.
*2 This is an index that expresses the degree of conductive contamination in the environment where
MONITOUCH is used.
“Contamination level 2” indicates the condition where only non-conductive contamination occurs. However,
due to condensation, temporary conductive contamination may occur.
Item TS1100 TS1070
Standards CE (EN61000-6-2, EN61000-6-4), KC
Power Supply
Permissible Range of
Voltage
24 VDC ± 10 %
Permissible Momentary
Power Failure
Within 1 ms
Power Consumption
(Maximum Rating)
16.0 W or less
Rush Current 22 A or less (within 2 ms)
Withstand Voltage DC external terminals to FG: 500 VAC, 1 minute
Insulation Resistance DC external terminals to FG: 500 VDC, 10 M or above
Physical Environment
Operational Ambient
Temperature
0 °C to +50 °C
*1
Storage Ambient
Temperature
10 °C to +60 °C
*1
Operational Ambient
Humidity
85 %RH or less (without dew condensation)
*1
Storage Ambient
Temperature
85 %RH or less (without dew condensation)
*1
Altitude 2000 m or less
Atmosphere No corrosive gas, no excessive dust, and no conductive dust
Contamination Level
*2
Contamination level: 2
Mechanical Working Conditions
Vibration Resistance
JIS B 3502 (IEC61131-2) compliant
Vibration frequency: 5 to 9 Hz Half-amplitude: 3.5 mm,
Vibration frequency: 9 to 150 Hz Constant acceleration: 9.8 m/s
2
(1 G),
3 directions of X, Y, and Z: 10 times
Shock Resistance
JIS B 3502 (IEC61131-2) compliant
Peak acceleration: 147 m/s
2
(15 G),
3 directions of X, Y, and Z: 3 times each
Electrical
Working Conditions
Noise Resistance
Noise voltage: 1000 Vp-p, pulse width: 1 µs, rising time: 1 ns
(Measured by using a noise simulator)
Static Electricity
Discharge Resistance
Compliant with IEC61000-4-2, contact: 6 kV, air: 8 kV
Mounting
Conditions
Weight Approx. 1.5 kg Approx. 0.9 kg
Dimensions W × H × D 283.0 × 220.0 × 42.0 mm 215.0 × 155.0 × 42.0 mm
Panel Cut-out
Dimensions
257.0 × 199.0 mm 189.0 × 134.0 mm
Case Color Black
Material PC / PS
+0.5
0
+0.5
0
+0.5
0
+0.5
0

Table of Contents

Related product manuals