5-8 2. Main Menu Screen
4. Ethernet (TS1100i/TS1070i Only)
Pressing the [Ethernet] switch on the Main Menu drop-down window brings up the Ethernet screen.
This screen is used to set an IP address for the TS unit.
*1 For more information, refer to the TS Series Connection Manual.
*2 This switch is not displayed if [IP Address Setting] (page 5-10) is set using V-SFT editor.
Moves back to the
Main Menu screen
or the initial screen.
Switches between [IP
Address Setting] and
[Select IP Address from
Network Table].
*1
*2
Displays the keypad
for IP address
setting.
Indicates whether the LAN port works correctly with an Ethernet cable inserted.
Normal: Connect (white)
Abnormal: Disconnect (gray)
When making the setting, press the [Setting
Finished] switch to determine the setting.
The Main Menu screen is displayed.
Ethernet screen
Main Menu drop-down window
To Next Page
Loading...
