Fuji Electric MONITOUCH TS Series - Operational Settings; Language and Communication Parameter Settings

5-6 2. Main Menu Screen
1. RUN
Pressing the [RUN] switch on the Main Menu drop-down window switches the screen to the RUN
mode.
2. Language Selection
Pressing the [Language] switch on the Main Menu drop-down window brings up the Language
Selection screen.
Languages* selected in the [Font Setting] dialog of the V-SFT-5 editor are displayed on the Language
Selection screen that is used for selecting an interface language for the Main Menu screen.
* The interface language for the Main Menu screen can be selected from English, Japanese, Chinese (Simplified),
Chinese (Traditional) or Korean. English is always displayed.
&CVC.QCFKPI
Main Menu drop-down window
RUN screen
Main Menu drop-down window
Language Selection screen