Fuji Electric MONITOUCH TS Series - Communication Parameter

5
2. Main Menu Screen 5-7
TS Series Operations
3. Communication Parameter
Pressing the [Comm. Parameter] switch on the Main Menu drop-down window brings up the Comm.
Param. screen.
Communication parameters of PLC1 to PLC8 that are set on the V-SFT-5 editor can be checked on
this screen.
Main Menu drop-down window
Comm. Param. screen
Moves back to the
Main Menu screen.
Changes the display
of the setting
between PLC1 to
PLC8.
Displays a specified
communication
parameter.