5
2. Main Menu Screen 5-41
TS Series Operations
11. Extended Function Setting
Holding down the [Editor: USB] switch for three seconds on the Main Menu screen displays the
Extended Function Setting screen. This screen is used to set the local port number for V-Link, Modbus
slave or multi-link communication.
* The switches on the Main Menu screen are not valid for 15 seconds after the [Setting Finished] switch is
pressed.
Selects [Modem Comm.
Baud Rate] or [Local No.].
Moves back to the
Main Menu screen.
Changes the setting
value.
Determines the
setting.
*
[Editor: USB] switch
Main Menu screen
Extended Function Setting screen
To Next Page
Loading...
