2
5. USB Connector 2-23
Specifications
Securing USB Cables
A USB cable may be disconnected from the TS unit depending on the mounting condition.
Using the cable tie supplied with the unit should prevent such a problem.
Securing the USB Cable
1. Preparing a cable tie
Draw a cable tie through the hole as shown in the figure below.
2. Inserting and securing a USB cable
Insert a USB cable and secure it using the cable tie.
The following figures show cases where only USB-miniB is used and where both USB-A and
USB-miniB are used.
When only USB-miniB port is used:
When both USB-A and USB-miniB (two cables) are
used:
To Next Page
Loading...
