Fuji Electric MONITOUCH TS Series - SRAM and Clock Management

5-12 2. Main Menu Screen
5. SRAM/Clock
Pressing the [SRAM/Clock] switch on the Main Menu drop-down window brings up the SRAM/Clock
screen.
This screen is used for correcting the built-in calendar (date and time) and for formatting the SRAM
area.
*1 Be sure to replace the battery. SRAM and clock time cannot be retained without battery power.
For replacing the battery, refer to “Coin-type Lithium Battery” (page 4-1).
Displayed when the time for battery replacement is approaching.
*1
Moves back to the
Main Menu screen.
[←] / [→] switch:
moves the cursor.
[+] / [−] switch:
corrects the date and
time.
Determines the
changed date and
time.
Formats an SRAM area.
SRAM/Clock screen
Main Menu drop-down window