5-24 2. Main Menu Screen
7-3. Saving Backup Copies of SRAM
This section explains the procedure for saving backup copies of the SRAM memory for battery
replacement.
1. Data selection
Press the [SRAM] switch on the Storage Transfer screen. When the switch is in the pressed state,
it is selected.
2. Transfer operation selection
Select [Display <−− Storage], [Display −−> Storage] or [Display <−−> Storage] from [Transfer
Menu] .
3. Access folder confirmation and selection
The SRAM Transfer screen is displayed.
• When [Display −−> Storage] or [Display <−−> Storage] is selected:
The access folder given the same name as the screen data in the TS unit is selected from
storage. The selected folder name is displayed.
[Transfer Menu] field
Folder name currently selected
Remaining storage memory
capacity
Starts [Display −−> Storage]
transfer.
Lights up during communication
with a storage device.
Moves back to the previous
screen.
Shows [Display <−−> Storage] when
[Display <−−> Storage] is selected.
Displays information of the
file currently selected (file
name fixed).
SRAM Transfer screen
To Next Page
Loading...
