5
2. Main Menu Screen 5-25
TS Series Operations
• When [Display <−− Storage]is Selected:
4. Transfer or comparison start
Check [Folder Name], [Rest Size], and the transfer direction. Press the [Start] switch.
During data transfer or comparison, the [Start] switch changes to [Transferring].
5. Data transfer completed
On successful completion, the following message dialog is displayed. Press the [OK] switch.
* If any other message is displayed, refer to “Message Dialog Displayed during Data Transfer
(between TS and Storage)” (page 5-27).
Used to check or change the folder
name.
For more information, refer to page 5-19.
Starts [Display <−− Storage] transfer.
Moves back to the previous screen.
Displays information of
the file currently selected
(File name
“SRM0000.BIN” fixed)
Folder name currently selected
SRAM Transfer screen
Remaining storage memory capacity
Lights up during communication with a
storage device.
Transfer or comparison start During data transfer or comparison
Data transfer or comparison completed
To Next Page
Loading...
