5
2. Main Menu Screen 5-19
TS Series Operations
When [Display <−− Storage] Is Selected:
1. When [Display <−− Storage] is selected, the Storage Transfer screen below is displayed.
* The access folder name that is set for screen data is displayed as default. If there is no screen data in the
TS series, “DAT0000” is displayed.
2. Access folder confirmation
Check [Folder Name], [Rest Size], and [Storage File Information]. When the selected folder is OK,
go to step 4. To change the folder, go to step 3.
3. Access folder change (showing folders in storage)
When changing the access folder to another folder, press the [Select Folder] switch.
The Select Folder screen is displayed. Select the desired folder and press the [OK] switch.
Lights up during communication
with a storage device.
Moves back to the previous
screen.
Used for checking or renaming
folder names. To step 3.
Remaining storage memory
capacity
Folder name currently selected *
Information of the folder
currently selected.
Starts [Display <−− Storage]
transfer.
Storage Transfer screen
Moves the cursor.
Displays the contents
of the folder where the
cursor is placed.
Determines the folder selection.
Shows the folders in storage.
Select Folder screen
To Next Page
Loading...
