Fuji Electric MONITOUCH TS Series - Storage Transfer

5
2. Main Menu Screen 5-15
TS Series Operations
7. Storage Transfer
Pressing the [Storage Transfer] switch on the Main Menu drop-down window brings up the Storage
Transfer screen.
This screen is used to transfer screen data between the TS series and a USB memory device or a CF
card (with an optional USB-CFREC).
1. [Data Selection] field
• [Screen Data]
Press this switch when transferring screen data to/from storage.
• [SRAM]
Press this switch when backing up data from the SRAM in the TS series to a storage device
before battery replacement or when uploading from a storage device to the SRAM.
Moves back to the
Main Menu screen or
the initial screen.
2.
1.
Main Menu drop-down window
Storage Transfer screen