Fuji Electric MONITOUCH TS Series - Names and Functions of Components

2-8 3. Names and Functions of Components
3. Names and Functions of Components
1. Display
This is the display unit.
2. DIP switches
Used to switch between RS-422 (4-wire connection) and RS-485 (2-wire connection) at COM1 or
setting the terminal resistance of the RS-422/RS-485 signal line at COM1 or COM3.
3. Battery holder
Contains a backup battery for SRAM and clock.
Replace the battery when its voltage has decreased.
4. USB-miniB (slave port)
Used for screen data transfer or connection with a PictBridge-compatible printer.
TS1100
1
3
2
7
8
9 10
4
11
5
6
11
11
11
1
3
2
7
8
9 10
4
11
5
6
11
11
11
TS1070