5-18 2. Main Menu Screen
7-2. Transferring Screen Data
This section describes how to transfer data to/from a USB memory device inserted in the TS series.
1. USB memory connection
Connect a USB memory device to the USB-A port.
2. Storage Transfer Screen display
Open the Main Menu drop-down window on the Main Menu screen. Press the [Storage Transfer]
switch on the window.
The Storage Transfer screen is displayed.
* Do not remove and reinsert the USB memory device from now on.
3. USB memory data selection
Select [Screen Data] from the [Data Selection] field.
4. [Transfer Menu] field
• Refer to “When [Display <−− Storage] Is Selected:” (page 5-19).
• Refer to “When [Display −−> Storage] Is Selected:” (page 5-22).
• Refer to “When [Display <−−> Storage] Is Selected:” (page 5-23).
[Data Selection] field
[Transfer Menu] field
Storage Transfer screen
To Next Page
Loading...
