5
2. Main Menu Screen 5-23
TS Series Operations
When [Display <−−> Storage] Is Selected:
1. When [Display <−−> Storage] is selected, the Storage Transfer screen below is displayed.
The screen data in the unit is compared with the screen data (in the DSP folder) in the access
folder.
2. Data comparison start
Press the [Start] switch.
3. During data comparison to data comparison completed
During data comparison, the [Start] switch changes to [Transferring]. On successful completion,
the following message dialog is displayed. Press the [OK] switch.
* If any other message is displayed, refer to “Message Dialog Displayed during Data Transfer
(between TS and Storage)” (page 5-27).
Folder name currently selected
Remaining storage memory
capacity
Starts comparison between
[Display <−−> Storage].
Lights up during communication
with a storage device.
Moves back to the previous
screen.
Displays information of the
folder currently selected.
Storage Transfer screen
Comparing Data comparison completed
To Next Page
Loading...
