5
2. Main Menu Screen 5-37
TS Series Operations
9-5. Keyboard Selection
This section describes how to select the type of the keyboard to be connected to the USB-A (master)
port.
1. Keyboard Selection screen
Press the [Keyboard] switch to display the Keyboard Selection screen.
2. Keyboard type selection
Select the keyboard type by pressing the [English] or [Japanese] switch.
* [English] is selected as the default.
After selecting a keyboard type from the Keyboard Selection screen and pressing the [Setting
Finished] switch, the selected keyboard remains effective even after turning off and on the
power.
3. Press the [Setting Finished] switch to determine the setting. The I/O Test screen is displayed
again.
Keyboard Selection screenI/O Test screen
Keyboard Selection screen
After selecting a keyboard,
press the [Setting
Finished] switch to
determine the setting. The
I/O Test screen is
displayed again.
Moves back to the I/O Test
screen.
Used to select a keyboard type:
English or Japanese.
To Next Page
Loading...
