2-22 5. USB Connector
3. Click the [Next] button on the screen below. Installation of the USB driver starts.
4. Click the [Finish] button on the screen below.
USB driver installation is complete.
Recognition of USB Driver
When the driver has been installed successfully, the [Device Manager] window shows “Operation
Panel - Operation Panel USB Driver”.
This will disappear when MONITOUCH and computer are disconnected.
If [Other Device] or a mark other than shown above is displayed even while the USB is connected, the
USB driver is not recognized. If this happens, uninstall the USB driver and reinstall it.
• For Windows Vista/7/8 • For Windows XP
To Next Page
Loading...
