2-16 5. USB Connector
V-SFT-5 Setting
An [Entry] icon must be registered on the screen where the keyboard is to be used.
In addition, numerical data or character display parts of [Display Function: Entry Target] are
required.
For more information, refer to the V8 Series Reference: Additional Functions.
TS Unit Setting
On the Main Menu screen, select a type of the keyboard to be connected.
For details, refer to “Keyboard Selection” page 5-37.
Mouse
By connecting a mouse to the TS series, the mouse can be used to operate screens displayed on the
unit.
Connection Example
For more information, refer to the V8 Series Reference: Additional Functions.
USB Hub
By connecting a USB hub to the TS series, devices like a printer or a USB-CFREC can be used at the
same time.
Connection Example
* A parallel printer can also be connected (on conditions that the model is available with the TS series and
connected with a commercially available parallel-to-USB cable (ELECOM’s UC-PGT recommended)). For
more information on available printer models, visit our website (http://www.monitouch.com).
USB-A
TS
Mouse
USB-A
TS
USB-B
USB-B
Printer
*
USB-HUB
USB-CFREC
To Next Page
Loading...
